Mission Darkness™ BlockBox Touch Multiport
The Mission Darkness™ BlockBox Touch Multiport is the most versatile, light-weight analysis enclosure in the BlockBox forensics series.
Operate, Charge, and Extract Information on Devices while Shielded from RF Signals
The Mission Darkness™ BlockBox Touch Multiport is the most versatile, light-weight analysis enclosure in the BlockBox forensics series. The product consists of a spacious faraday chamber with a built-in multifunctional shielded filter including two USB ports, one RJ45 ethernet port, and one AC power port. Additional components include a double layer conductive glove, large transparent window, branding/evidence card pocket, unique serial number, and LED light strip. The combined features allows an operator to connect multiple electronic devices inside the faraday chamber to a local network internally, as well as connect to a charging source, computer, or data extraction tool externally. The primarily use is for forensic investigators to conduct triage and analysis on seized devices (such as cell phones and tablets), while remaining shielded from RF signals. Being able to keep devices charged indefinitely prevents lockout mode and reduces the amount of time needed to break a passcode, enabling the maximum amount of data extraction and unlocking with tools like GrayKey, Cellebrite, XRY, BlackBag, Oxygen, etc. Alternative uses relate to mobile device testing, since the product can be used to create an isolated and controlled environment.
The interior faraday chamber includes padded side walls and two layers of high-shielding TitanRF™ Faraday Fabric on all sides with dual paired seam construction. The faraday chamber will block all wireless signals including WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, NFC, and radio signals with 60dB-80dB average attenuation from low MHz to 5GHz spectrum. The exterior is built with water-resistant ballistic nylon outer material to ensure that devices and faraday fabric stay protected.
The faraday chamber uses a NeoLok™ closure system, allowing an operator to effortlessly close the faraday chamber by way of a double roll and strong neodymium magnetic seal holding the roll in place. A quick-snap strap over the roll provides extra security, which is especially useful if transporting shielded devices inside to various locations, such as from the collection site to the lab. The magnetic closure increases the product’s overall longevity, compared to faraday enclosures built with Velcro which can damage gloves and wear out with frequent use due to “hard pulling” on the closure area.
The BlockBox Touch Multiport is easy to use, extremely high-shielding, and large enough to accommodate a variety of midsize electronics and accompanying accessories. The kit includes corresponding cables (two USB A male to A male cables, one AC power cable, and one right angle AC adapter), plus a removable signal-dampening foam block, which provides a platform to take photos of devices, as well as additional shielding in high-signal strength environments.
*PLEASE NOTE: 1 WEEK LEAD TIME!
BlockBox Touch Multiport pictured with GrayKey inside of the faraday compartment
Demonstration Videos
Features
- Military-grade soft-sided analysis enclosure designed for law enforcement forensic investigators and armed services to operate, charge, interrogate, and conduct device triage at any location while shielded from RF signals
- Built-in double layer conductive mitten allows for shielded touch screen device operation
- Wide opening accommodates any size tablet, cell phone, or similar size device
- Large transparent window for viewing devices
- Two layers of high-shielding TitanRF Faraday Fabric on all interior sides with dual paired seam construction (TitanRF Faraday Fabric is lab certified MIL STD 188-125 compliant)
- Shielded filter with 1 RJ45 ethernet port, 2 USB ports, and 1 AC power port for connecting to multiple devices
- RJ45 ethernet port allows for shielded internet connection and controlled/isolated environment
- Indefinite power capabilities to prevent lockout mode and reduce the amount of time needed to break a passcode, enabling the maximum amount of data extraction and unlocking with tools like GrayKey, Cellebrite, XRY, BlackBag, Oxygen, etc.
- Blocks WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, NFC, and radio signals with 60-80dB average attenuation
- EMI, EMR, and EMF shielding
- NeoLok closure system consisting of a double roll with a magnetic seal, plus additional quick-snap closure strap for ultimate security and signal blockage
- Magnetic LED light to illuminate the interior space
- Water-resistant ballistic nylon outer materials
- Devices can remain shielded inside the closed faraday chamber during transport
- Closable transparent pocket on back to place agency information
- Removable signal-dampening foam block (for increased shielding in high-signal-strength environments, also serves as a platform for analyzing or taking photos of devices inside)
- Unique serial number for asset tracking
- Made in the USA
- SKU: MDFB-BBT-MPF
Dimensions
- Internal usable dimensions: 17″ x 13″ x 6″
Applications
- Lab forensic analysis
- State, local, federal, and military forensics
- Mobile device testing
- Military grab-and-go missions
- Federal search and seizure warrants
- Anti-hacking, anti-tracking, and anti-spying assurance
- Counter-surveillance
- EMP and CME protection
- Signal isolation
Kit Includes
- Mission Darkness BlockBox Touch Multiport
- Branding and evidence card pocket
- 2 USB A male to A male cables
- AC power cable
- Right angle AC adapter
- Signal-dampening foam block
- LED light strip
- Usage instructions
- Unique serial number card
- Stylus
Easily Add Department/Agency Info
Mission Darkness™ faraday bags and BlockBox Touch analysis enclosures have a transparent pocket on the back to place a business card or more permanent sticker. There is no need to silkscreen your department information on the bag. If you would like a permanent way to custom brand items, we can add woven labels during production. Please contact us to discuss options
Instruction Card
The product requires shielded cables both within and outside of the enclosure to effectively block RF signals. Click the button below for product care and usage instructions (a hard copy is included with the kit).
NeoLok magnetic closure is safe to use with conductive gloves, effective at blocking signal, and lasts longer than Velcro seals
The dual-sided filter includes 1 RJ45 ethernet port, 2 USB ports, and 1 AC power port
The user can view device screens through the large shielded transparent window
Filter Function
Each connection on the BlockBox Touch Multiport is an independent pass-though, meaning, each individual connection will only pass power and/or data to its opposite connection on the other side. Below are a few connection examples showing the correct and incorrect ways to connect devices through the BlockBox Touch Multiport.
*Pro tip: use the right angle AC adapter to connect a charging bank or power strip (not included) internally to charge multiple devices.
